Questions To Ask


The Following F.A.Qs Will Help You Order The Precise Part For Your Hot Rod. 




  • STEEL FENDERS

Q-Does your car have original steel fenders?

D- Answer NO if fiberglass

  • STEEL SNAP

Q- Does your car have steel fenders?

D- If you answer YES, By default, this bra requires 2 snaps to be installed. 1 on the underside of each fender, in the fender lip/fender roll edging. Using a 1/8" drill bit, make a small hole. Then tighten in the provided 3/8" stainless screw stud. The female side is installed in the bra. Fold the bra around the fender and snap together. If you answer NO, bra will automatically come with the top outside tab being a bendable velcro tab. Answer NO if you've reinforced your fenders and cannot install the snap. Note: This question only applies to a handle full of our bras. Not applicable on every model.

  • FENDER BRACE

Q- Does your fender brace come all the way out to the edge of the fender?

D- Answer YES if applicable. Answer No, your bra will automatically come with the top outside tab being a bendable velcro tab. Reason being to keep the bra from slipping down due to no fender brace that comes all the way out the edge of the fender.

  • HOOD

Q- Do you have an original 4pc"clam shell" hood?

D- Answer YES if applicable. Answer NO if you have solid hood sides a 1 or 3pc hood that opens from the top. If you aren't running a hood or modified the car, email a photo and/or call in your order to discuss.

  • HOOD LATCHES

Q- Does your car have the original hood latches?

D- Answer YES if applicable. Answer NO if you've removed your latches and call in your order to discuss.

  • BUMPER

Q- Does your car have the original bumper brackets/bumper?

D- What I need to know is if you have bumper brackets are in the original location that protrude through the fender so I know whether or not to cut out to go around this bracket. If you've changed/ modified the bumper/brackets or pulled in your bumper/splash towards the car, please call to order.

  • PARKLIGHTS

  • Q- Do you have the original parklights in the original location?

    D- Answer YES if applicable OR If you have replaced the parklights with turn signals and the signals are in the original location/original size. Answer NO if you've filled in or removed. If you've modified this, please call to order.

  • TURN SIGNALS

Q- Do you have the original turn signals in the original location?

D- Answer YES if applicable. Answer NO if you've removed. If you've modified this, please call to order.

  • TOP SPEAR

Q- Does your car have top spears on top of the fenders above the headlights?

D- Answer YES if applicable. Answer NO if you've removed or modified.

  • LICENSE PLATE

Q- Does your car have a FRONT license plate in the original location?

D- Answer Yes if applicable. If you have a front license/historical plate, whether or not you desire it to show, there must be a cutout to go around it or else the bra won't properly fit. Answer NO if you've removed. Call if you've relocated or have questions.

  • SPLASH APRON

Q- Does your car have the original splash apron?

D- Answer if YES if applicable. Email a photo of the front end of the car clearly showing the splash apron and/or call to discuss if you've shortened, removed or modified.

  • HORN GRILLS

NOTE: Only applicable for 1936 Ford and 1936 Dodge

Q- Does your car have the original horn grills?

D- Answer YES if applicable OR if you've replaced the horn grills with turn signals that are in the original location and original size. Answer NO if you've removed and filled in your fender.